What is a lug butterfly valve？
The driving method of the lug butterfly valve can be used by manual, worm-gear, pneumatic, and electric. The connection method can be used for flanges and clamps. Structural forms can be used for single eccentric, middle line, double eccentric, triple eccentric. Seal structure can choose soft seal, hard seal, and the pressure range PN0.1-10Mpa. The nominal diameter is DN40 ~ 2000mm. The material can choose cast steel and stainless steel. Due to the extensive range of valves, the same valve has different combinations in different occasions and working conditions .
The disc of the wafer lug butterfly valve is installed in the diameter direction of the pipe. In the cylindrical channel of the butterfly valve body, the disc rotate around the axis, and the rotation angle is between 0°and 90°. When rotating to 90°, the valve is fully open.
Advantages of the lug butterfly valve：
The length of the short structure can save raw materials and installation space. It can also effectively supports the strength of the pipe.
2.Good sealing performance
The squeezing speed of the disc can ensure that the valve is effectively sealed.
3.Can meet the needs of various traffic
According to the requirements of different working conditions, the design of V-shaped, triangular or pentagonal oil ports to meet the needs of various flow regulation.
4.Epoxy resin layer
Valves are epoxy coated with “zerk” type grease fitting for easy lubrication on neck and gear case (if applicable).
1. WESDOM patent products, patent certification
The product side flanges comply with national, German, Russian, American, British and Japanese standards and other domestic and international standards for multiple pressures, easy connection and wide adaptability, which can reduce the type of purchase and stock.
2. The product has an independent identity to ensure traceability
Each wesdom product has its own unique identification number, to ensure product traceability.
3. Provide material inspection report
All wesdom products can provide the material inspection report of the main parts.
4. One-stop service
One-stop service, we not only supply high quality products, also supply solutions and after-sales service.
5. WESDOM has a lot of project experience
We have a lot of project experience in countries such as Pakistan and the Philippines, WESDOM has always been noticed all over the world, and trust comes from quality.
Quality control process
|SIZE||A||B||C||L||ANSI 150B||DIN PN 10||DIN PN 16||JIS 10K||ISO 5211||Top Flange|