Features:
Single Eccentric Disc-Shaft
Anti-Blow Out Stem
Bi-Directional
Fire safe Design
Low Friction Body Seat
Zero Leakage
Inpection and Test :
Body Test: 1.5 times the working pressure with water. This test is performed after valve assembly and with disc in half position open, it is called as a body hydro test.
Seat Test: 1.1 times the working pressure with water.
Function / Operation Test: At the time of final inspection, each valve and its actuator (Flow-Control Lever / Gear / Pneumatic Actuator), under goes a complete operating test (Open/Close). This test carried out without pressure and at ambient temperature. It ensures the correct operation of the valve / actuator assembly with accessories such as solenoid valve, limit switches, air filter regulator etc.
Special Test: On request, any other test can be carried out according to special instruction by client.
Parameters
| SIZE | A | B | C | L | JIS 10K | Top Flange | ||
| mm | in | øK | N-ød | |||||
| 40 | 1.5″ | 67 | 141 | 32 | 33 | 105 | 4-ø19 | F05 |
| 50 | 2″ | 67 | 141 | 32 | 43 | 120 | 4-ø19 | F05 |
| 65 | 2½” | 75 | 151 | 32 | 46 | 140 | 4-ø19 | F05 |
| 80 | 3″ | 95 | 160 | 32 | 46 | 150 | 8-ø19 | F05 |
| 100 | 4″ | 111 | 180 | 32 | 52 | 175 | 8-ø19 | F07 |
| 125 | 5″ | 129 | 193 | 32 | 56 | 210 | 8-ø23 | F07 |
| 150 | 6″ | 142 | 207 | 32 | 56 | 240 | 8-ø23 | F07 |
| 200 | 8″ | 170 | 240 | 45 | 60 | 290 | 12-ø23 | F10 |
| 250 | 10″ | 206 | 270 | 45 | 68 | 355 | 12-ø25 | F10 |
| 300 | 12″ | 238 | 316 | 45 | 78 | 400 | 16-ø25 | F10 |
| 350 | 14″ | 267 | 368 | 45 | 78 | 445 | 16-ø25 | F10 |
| 400 | 16″ | 298 | 400 | 51 | 86 | 510 | 16-ø27 | F14 |
| 450 | 18″ | 318 | 422 | 51 | 105 | 565 | 20-ø27 | F14 |
| 500 | 20″ | 349 | 479 | 57 | 130 | 620 | 20-ø27 | F14 |
| 600 | 24″ | 410 | 562 | 70 | 152 | 730 | 24-ø33 | F16 |
